P333URT7HNC1AAB

This is a Pressure Package utilizing the Roots 33 Universal RAI® with a 7.5HP Motor. The package includes a 2.5" inlet filter, 2.5" inlet silencer, 2" discharge silencer, 2" Kunkle 337 discharge pressure relief valve, 2" inline type check valve and discharge pressure gauge. The package is integrated on a VersaBase 23.

Package Components:

• Roots Frame 33 Universal RAI®
  
• 7.5 HP TECO, 1800 RPM, TEFC, 1.15 SF Motor
  
• V-Belt Drive with 1.767:1 Ratio using 3V Cross Section QD type sheaves and bushings (various drives may be substituted to meet your specific need)
  
• 213T Motor Slide Base, Twin Screws
  
• Universal CCF-2.5" Filter with paper element
  
• Universal SD-2.5" Inlet Silencer, Chamber-Absorptive Type
  
• Universal URB-2" Discharge Silencer, Chamber Type
  
• Kunkle 337-2" Pressure Relief Valve set at 7 psig
  
• 2.5" Inline check valve with steel body and aluminum internals
  
• Discharge Flex connector between blower discharge and silencer
  
• 2.5" Compression Coupling between Inlet Silencer and Blower
  
• Discharge Pressure Gauge kit with 2.5" Dial, 0-15 psig, liquid filled with snubber and petcock valve
  
• REP VersaBase 23 with appropriate guards and brackets
  
• Standard REP Paint, Gray Top Coat with OSHA Yellow Guards
  
• Unit was mechanically tested under full load prior to shipment (standard)
  

Performance for this configuration would be:

• Inlet Volume = 147 ICFM
  
• Blower Speed = 3,101 RPM
  
• Discharge Pressure = 6 psig
  
• Total Differential Pressure = 6.5 (includes losses)
  
• Required Horsepower = 5.9
  
• Temperature Rise = 89°F
  
• Noise Level = 91.2 dBA at 3'
  

A combination acoustical weather enclosure is available for this configuration to meet more aggressive noise requirements.

The following units may also be used on this frame in this configuration:

• Roots Universal RAI® DSL Frame 33
  
• Roots Universal RAI-J™ Frame 33
  
• Sutorbilt® Legend 3MP
  
• MD Pneumatics COMPETITOR PLUS™ Frame 3003