EN130B00H1
 

EN130B00H1

Noise and Weather Enclosure
2" thick attenuation material
76.5" x 47" x 59.5"
Price: $3,890.00
In Stock? : No ()
Description
  • 14 Gauge Galvanized Skin
  • 2" Thick, 8 lb/ft3 Rockwool Acoustic Insulation
  • Noise reduction of 12 dBA at 3' from package
  • Insulation Mechanically Fastened to internal surfaces via stud welded pins
  • Four (4)  Removable Access Doors providing easy access to system components
  • Doors and roof are gasketed
  • Quarter turn latches
  • Removable Roof
  • Ventilator rated at 1170 CFM, 120Vac/1 Phase/60 Hz
  • Thermostat control on the ventilation fan

Options:
  • Mild Steel and Painted Skin
  • Mild Steel and Powder Coated Skin
  • Aluminum Skin
  • Stainless Steel
  • 1.25" Thick decoupled foam with quilted mylar cover
  • Fabricated Steel Sub-base with anchors and lifting lugs
  • Upgraded Latches

Enclosure Exterior Dimensions: 76.5" Long x 47" Wide x 59.5" Tall
Enclosure Interior Dimensions: 71.6" Long x 42" Wide x 57.5" Tall
Enclosure Weight (excluding shipping skid) 711 lbs (323.2 kg)
Utilities Required: 120 Vac/1 Phase/60Hz, 2.8 Amps,0.1 HP,200 Watts

Please specify the desired location of your discharge pipe penetration. pdblowers will supply "Pipe Plates" that can be used to minimize the open area around your penetrating pipe.

Air is introduced into the enclosure on the ends at the top. Ventilation air must be used to eliminate overheating of a blower package. If you elect to use the enclosure for other equipment, please specified the expected heat load and we can offer solutions to best suit your needs.

Additional Views are provided below:
EN130B0000 DIAMETRIC VIEW
EN130B0000 FRONT VIEW
EN130B0000 RIGHT SIDE VIEW

Documents