Sutorbilt Blower Legend Series "P" Performance Parameters
The Sutorbilt Blower Legend "P" series was introduced in 1995 with upgraded features compared to the "L" series. The primary changes were harder gears, cylindrical roller bearing on the drive shaft and viton elastomers in the seals.
| Frame | Conn | Max RPM | cfr | Slip | Max ΔT | Shaft Dia | Max ΔP | Max Vac | Max ICFM @ 1PSI |
| 2MP | 1" NPT | 5275 | 0.017 | 500 | 215 | 0.625 | 12 | 15 | 81 |
| 2LP | 2" NPT | 5275 | 0.035 | 450 | 185 | 0.625 | 7 | 14 | 169 |
| 3HP | 1-1/4" NPT | 3600 | 0.045 | 280 | 220 | 0.75 | 15 | 16 | 149 |
| 3MP | 2" NPT | 3600 | 0.060 | 260 | 185 | 0.75 | 12 | 15 | 200 |
| 3LP | 2-1/2" NPT | 3600 | 0.104 | 230 | 160 | 0.75 | 7 | 14 | 350 |
| 4HP | 1-1/2" NPT | 3600 | 0.069 | 255 | 210 | 0.875 | 15 | 16 | 233 |
| 4MP | 2-1/2" NPT | 3600 | 0.117 | 225 | 180 | 0.875 | 10 | 16 | 398 |
| 4LP | 3" NPT | 3600 | 0.170 | 215 | 160 | 0.875 | 7 | 14 | 580 |
| 5HP | 2-1/2" NPT | 2850 | 0.140 | 150 | 200 | 1.125 | 15 | 16 | 378 |
| 5MP | 4" NPT | 2850 | 0.210 | 140 | 180 | 1.125 | 13 | 16 | 569 |
| 5LP | 4" NPT | 2850 | 0.350 | 125 | 160 | 1.125 | 7 | 14 | 954 |
| 6HP | 3" NPT | 2350 | 0.227 | 130 | 240 | 1.375 | 15 | 16 | 504 |
| 6MP | 5" NPT | 2350 | 0.383 | 115 | 225 | 1.375 | 14 | 16 | 856 |
| 6LP | 6" FLG | 2350 | 0.718 | 100 | 160 | 1.375 | 7 | 12 | 1615 |
| 7HP | 4" NPT | 2050 | 0.367 | 100 | 240 | 1.562 | 15 | 16 | 716 |
| 7MP | 6" FLG | 2050 | 0.733 | 85 | 225 | 1.562 | 10 | 16 | 1440 |
| 7LP | 8" FLG | 2050 | 1.200 | 75 | 160 | 1.562 | 6 | 12 | 2370 |
| 8HP | 4" NPT | 1800 | 0.566 | 90 | 240 | 1.75 | 15 | 16 | 968 |
| 8MP | 8" FLG | 1800 | 1.04 | 75 | 225 | 1.75 | 10 | 16 | 1794 |
| 8LP | 10" FLG | 1800 | 1.74 | 67 | 160 | 1.75 | 6 | 12 | 3015 |
Performance is based on 14.7 PSIA, 68F and 36% Relative Humidity.
< Back to Articles List