This customer builds turnkey systems that remove waste wood and load it onto trailers to be hauled away for recycling.
Some of their systems grind and shred waste wood, such as shipping pallets, into chips while removing any metal scraps, and some of their systems pull sawdust out of the air inside facilities. Their end users have these systems installed on-site to cut down on the cost of removing waste wood.
Our project involved designing and building 8 blower packages to be integrated into their wood removal systems. These pressure packages all included 59 URAI blowers, half with 20HP motors and half with 25HP motors.

Package Option 1
- Blower, Roots 59 URAI
- Motor, 20HP, Baldor, 256T
- Double Adjusting Motor Base
- Silencer, Universal SD-4, Chamber-Absorptive
- Filter Silencer, 4″ Solberg, wire element
- Pressure Gauge, 0-15 psig
- Check Valve, 4″ wafer
- Relief Valve, 2″ 337, 5.5 psig set point
- Package Base, VersaBase 567
Package Option 2
- Blower, Roots 59 URAI
- Motor, 25HP, Baldor, 284T
- Double Adjusting Motor Base
- Silencer, Universal SD-4, Chamber-Absorptive
- Filter Silencer, 4″ Solberg, wire element
- Pressure Gauge, 0-15 psig
- Check Valve, 4″ wafer
- Relief Valve, 2″ 337, 5.5 psig set point
- Package Base, VersaBase 567
Latest Projects
Enclosed Blower Packages for Activated Carbon Injection
Activated carbon injection (ACI) is an effective method to reduce toxic mercury emissions from coal fired power plants. These two enclosed, direct drive pressure packages will be used to inject the activated carbon at a large power plant in the...
Read MoreBlower Package for Wastewater Treatment in South America
This is our standard P2 pressure package featuring a Roots 56 URAI blower. It is on its way to South America where it will be used for wastewater treatment.
Read More