Dual Stage Pressure Package for Biodiesel Production

Biodiesel is a clean-burning, renewable alternative to diesel fuel that is produced using different types of waste products collected from other industries, like used cooking oil from restaurants and factories.  These oils and fats are turned into biodiesel through a chemical process known as transesterification.  As a part of this production process, positive displacement blowers are used to handle the biogas.

Biogas can be corrosive so blower packages will have additional features for gas service.  Roots URAI-G blowers feature mechanical seals to prevent gas from leaking out of the blower system.  While not implemented for this particular project, the interior surfaces of the blower can also be coated in different protective finishes to resist the corrosive effects of the gas.

First Stage Package

C1, 56 URAI-G, 25 HP, Pressure Package (First Stage)

Roots 56 URAI-G Positive Displacement Rotary Gas Blower
VersaBase 34 with Integral Belt Guard
Motor, 25 HP, TEFC, Explosion Proof, 1800 RPM, 1.15 SF, 208-230/460 Volts, 3 Phase 60 Hz
Motor Slide Base, Double Adjusting
Drive, V-Belt, minimum service factor of 1.4
Filter, Silencers, and Relief Valve not included

 

59 URAI-G pressure package for biodiesel

Second Stage Package

C2, 47 URAI-G, 25 HP, Pressure Package (Second Stage)

Roots 47 URAI-G Positive Displacement Rotary Gas Blower
VersaBase 34 with Integral Belt Guard
Motor, 25 HP, TEFC, Explosion Proof, 1800 RPM, 1.15 SF, 208-230/460 Volts, 3 Phase 60 Hz
Motor Slide Base, Double Adjusting
Drive, V-Belt, minimum service factor of 1.4
Filter, Silencers, and Relief Valve not included

47 URAI-G gas pressure package for biodiesel production

Refurbishment of existing components

This customer wished to refurbish some of their existing equipment for this project.

Unfortunately these blowers could not be salvaged due to the amount of build up and corrosion inside the units; even if the parts had been sandblasted they would no longer have been able to meet the required tolerances.

The existing mounting bases were able to be refurbished and used for the two new packages.

Previous blower that was scrapped
Existing blower bases that were refurbished
Latest Projects

Custom Equipment Noise Enclosure

We usually design noise enclosures to house our blower packages, but we can also create a custom enclosure to house a customer’s existing equipment.  In this project our customer had their own pump package that required acoustical dampening and protection...
Read More

Roots RAM Vacuum Packages for Plastic Resin Conveying

Plastic resin is moved using blower packages that suck the pellets through piping systems, out of rail cars and into other types of storage and transport containers. These vacuum packages in our V4 configuration feature Roots 624 RAM vacuum pumps...
Read More