NLGI 2 Aluminum Complex Synthetic Grease, for use on positive displacement blowers & vacuum pumps
Our synthetic aluminum complex grease is ideal for blowers that utilize grease lubrication of the drive-end bearings. Special additives give it water wash off properties that far exceed other greases, providing exceptional performance in the most demanding applications. This premium grade blower grease provides excellent bearing performance even under high pressure and temperature.
- Excellent thermal & oxidative stability
- Excellent resistance against water contamination
- Outstanding materials compatibility
- Superior rust and corrosion control
- Reduced maintenance costs and downtime
- Non-toxic / Non-hazardous
Property | pdblowers grease |
---|---|
NLGI Grade | 2 |
Soap Type | Aluminum Complex |
Penetration – 60 Strokes | 268 |
Penetration – 10,000 Strokes | 275 |
Dropping Point | 550°F (288 °C) |
Water Washout – Loss at 100°F | <0.1% |
Four Ball EP (Weld) Kg | 500 |
Load Wear Index Kg | 64 |
Four Ball Wear, Scar mm | 0.38 |
Rust Test D665 | PASS |
Proper lubrication is the key to long bearing life. Refer to your blower manual for specific instructions and recommended greasing intervals based on your blower’s operating hours
Maintenance tips
- If you plan to switch to a different type of grease, do a full purge of the old grease. Mixing different types of greases can cause them to separate and lead to blower failure.
- Do not overgrease
- Apply with a hand pump only, as a pneumatic grease gun can fill too quickly and damage the seals
- Keep grease vents clear to allow grease to escape and prevent damage to seals
pdblowers Aluminum Complex Blower Grease – Box of 10
$190.00
Shipping Weight: | 10.5 lbs |
---|---|
Shipping Dimensions: | 11.5 × 5 × 10 in |
Manufacturer: | pdblowers, Inc. |