While all of our blower and vacuum pump packages are designed for easy access and maintenance, some installations may be limited by confined spaces. When space is a challenge, a compact design may be required to fit all of the necessary equipment within a small footprint. These packages were designed to replace the equipment in existing Roots EasyAir enclosures.
P1 Pressure Package with Roots 45 URAI-DSL Blower on BBF Base
- Roots 45 URAI DSL Positive Displacement Rotary Blower
- BBF-250 Base with DL-200 Integral Belt Guard and associated brackets for accessory mounting
- Motor, 15 HP, TEFC, Premium Efficiency, 1800 RPM, 230/460 Volts, 3 Phase, 60 Hz
- Drive, V-Belt
- Inlet Filter Silencer, 2-1/2″, Paper Element, Solberg FS-230P-250
- Discharge Silencer, 2-1/2″, Built into base
- Discharge Flex Connector, 2-1/2″, Silicone Impregnated Fiberglass
- Relief Valve, Pressure, Kunkle 337, 2″, Set at 10 PSI
- Check Valve, 2-1/2″ MNPT, EPDM Seal
- Pressure Gauge, 2.5″ Dia.,0-15 PSIG, Liquid Filled, Snubber & Gauge Cock
Latest Projects
Fluidizing Pressure Packages
When bulk materials are stored in silos, positive displacement blowers are often used to inject air into the bottom of the silo where it will pass up through the material causing it to act more like a fluid that can...
Read MoreSteel Dust Conveying Blower Packages
These pressure packages were designed for a large recycling facility that recovers zinc and lead from industrial waste products. Each blower package features a 616 RAM Blower that provides 1120 CFM of airflow to convey the materials through the process.
Read More




