If you’re here looking for the OEM’s recommended gear oil for the StripMeister E250, you’re in the right place. We stock the Roots VG-320 synthetic oil at all of our warehouses, in quarts, gallons and pails. We also have an equivalent pdblowers brand oil in stock too.
Why do we carry gear oil for the StripMeister E250? Well we don’t, not intentionally. The lubricants we stock are made for use in industrial air blowers. But if other manufacturers think our products are the best fit for their equipment, who are we to argue?
The synthetic oils we carry are designed to lubricate the gears and bearings of positive displacement blowers. They prevent metal-to-metal contact while resisting oxidation, shear, and thermal degradation. The high viscosity index, high flash and auto ignition points, and low volatility provide superior temperature resistance. Additives control the formation of rust, corrosion, carbon & varnish. Our industrial type, non-detergent, rust-inhibiting, anti-foaming synthetic lubricants are designed for high performance in tough conditions.
StripMeister Gear Oil Recommendation
What type of maintenance is required on the StripMeister E250?
To ensure smooth operation of your StripMeister E250 we recommend a maintenance of the following:
Make sure the machine is unplugged before performing any maintenance
1. Check oil level on the gear box monthly.
Before checking the oil, make sure the gear box is not hot. If oil is visible when the screw is removed from Oil filler hole on the gear box, the unit is still full. If not visible top up with manufacturers recommended gear oil (ISO VG320 or Petro of China CN320) until full.
For gear oil visit website:
https://www.pdblowers.com/product/roots-synthetic-lubricant-iso-vg-320-quart/ (this is the current URL)
2. Inspect blade for damage
3. Inspect and clean Feeder Drive of dirt and debris
4. Inspect whole machine for any loose parts
AUTHOR
Latest Projects
Fluidizing Pressure Packages
When bulk materials are stored in silos, positive displacement blowers are often used to inject air into the bottom of the silo where it will pass up through the material causing it to act more like a fluid that can...
Read MoreSteel Dust Conveying Blower Packages
These pressure packages were designed for a large recycling facility that recovers zinc and lead from industrial waste products. Each blower package features a 616 RAM Blower that provides 1120 CFM of airflow to convey the materials through the process.
Read More