Miscellaneous

TO BE DELETED – TEMPORARY HOLDING SPOT FOR DOCS THAT I DONT KNOW WHERE ELSE TO PUT

Edwards EH Mechanical Booster Pumps Datasheet April 11, 2024
Edwards EH Mechanial Booster Pumps IOM April 11, 2024
Howden Roots Warranty Policy and Procedure WP-5020 Rev-12 (SPANISH) February 6, 2020
Howden Roots Lubricants Allergen Statement (Jan 2018) February 12, 2018
Howden Roots LLC Standard Terms and Conditions for Sale February 12, 2018
Howden Roots Warranty Policy and Procedure WP-5020 Rev-11 July 2016 February 12, 2018
ExVel Turbo Fans – Mechanical Vapor Compression December 4, 2017
ExVel Turbo Fans For process air, process gas and vapor compression December 4, 2017
ExVel Turbo Fans brochure December 4, 2017
Korfund Dynamics Vibration Isolators R/RD Series brochure October 12, 2017
pdblowers Credit Application October 20, 2016

pdblowers Credit Application

Blower Orientation March 4, 2010

Blower Orientation shows the various shaft and discharge locations available on a Roots Whispair™ type unit. This illustration can also be used for any series of blower to more accurately identify the configuration. Orientations illustrated include Top Hand Drive, Left Discharge; Left Hand Drive, Bottom Discharge; Top Hand Drive, Right Discharge; Left Hand Drive, Top […]

Blower Briefs August 1990 March 1, 2008

Blower Briefs was a newsletter that was created back during the early days of pdblowers Inc.. Their purpose was to inform the customer about positive displacment blowers as well as to provide information about changes at pdblowers as we grew. Number 1 primarily discusses the products that we handled in the first year of our […]

Blower Briefs November 1990 March 1, 2008

Blower Briefs was a newsletter that was created back during the early days of pdblowers Inc.. Their purpose was to inform the customer about positive displacment blowers as well as to provide information about changes at pdblowers as we grew. Number 2 primarily discusses the Sutorbilt® California Series Blowers and how the “L” Series differed […]

Blower Briefs February 1993 March 1, 2008

Blower Briefs returned after nearly a 2 and a half year hiatus. We were so busy growing that we didn’t have time to produce the newsletter. Tanya Williamson took it under her wing and began publishing once again. This edition primarily focused on our personnel at that time.

Blower Briefs March 1993 March 1, 2008

This addition of Blower Briefs focused on how to specify a blower package. The pricing on this sheet regarding blower repair is only 15 years out of date!

Blower Briefs April 1993 March 1, 2008

NOISE!! Yes, positive displacement blowers are noisy and this issue discusses ways to reduce the noise level. It also briefly discusses liquid ring pumps.

Blower Briefs May 1993 March 1, 2008

The Gardner-Denver Cycloblower® is featured in this issue. Positive displacment blower performance is also discussed.

Blower Briefs June 1993 March 1, 2008

Blower Briefs discusses the Sutorbilt® California Series blower, overhung load and lubrication.

Blower Briefs July 1993 March 1, 2008

Blower Briefs covers our capability regarding noise enclosures. We started building noise enclosure back in 1991. In the early 90’s we primarily manufactured welded steel enclosures. While we still manufacture welded enclosures, the most popular today are the formed and bolted enclosures. As it turned out, this was the last of our Blower Briefs. This […]

Schedule 40 Pipe and Flange Data February 15, 2008

Tabulated data regarding Schedule 40 Pipe including 150 lb flange data. Also included in the tabulation is hardware data and thread data.

Gas Velocity through Schedule 40 Pipe February 15, 2008

Table provides a quick reference of pipe diameter versus velocity in FPM (Feet per Minute) and the corresponding flow rate in CFM (cubic feet per minute)