Packages and Enclosures
Skid Weldment Drawing, 4.5″x42″x74″,0.188″ Thick formed plate with 4 reinforcement bars.
Motor Control Panel,125HP Soft Start and Level Control, 970303
Section C-C shows the various gas and liquid connections on the enclosure.
BV022A0000 Sheet 6 to 7 Enclosure Mounting Hole Location
P&ID for a SVE system utilizing a 9CDL18 with 125 HP motor. Air/Water separator, flame arrester and acoustical enclosure and skid to integrate the entire system.
P&ID Drawing for 970303 SVE System. SVE system utilizes 9CDL18 with 125 HP motor
Photograph of EV027B0000 with components called out – unit loaded on truck – front corner view
Photograph of EV027B0000 with components called out – back view
Photograph of EV027B0000 with gauge panel components called out.
BV022A0000 Sheet 1 to 7 Enclosure Front and Side
Section View A-A Shows a top view of the basic package
Section View B-B Shows a side view of the basic package
BV044B0000 Sheet 1 of 2 General Arrangement Drawing for Roots 1016 RAS-JV with 200 HP Motor with air/water separator and discharge heat exchanger.
BV044B0000 Sheet 2 of 2 General Arrangement Drawing for Roots 1016 RAS-JV with 200 HP Motor with air/water separator and discharge heat exchanger. This sheets shows the instrument panel.
45 URAI Package in P3 configuration, 3″ Inlet Filter, 3″ Inlet Silencer, 2.5″ Discharge Silencer, 2″ Kunkle 337 pressure relief valve, discharge check valve, 7.5 HP TEFC Motor
45 URAI, 7.5HP, L/E P3 configured pressure package