Product Description
Solberg Manufacturing Model Designation: F-18P-125
Filter, 1.25″ MPT Connection
Dimensions: 6.1″ OD x 6.63″ Height
Rated Capacity: 70 CFM
Element Flow Rating: 100 CFM
Element Type: Paper
Weight: 3.3 lbs
This configuration utilizes a paper filter element rated at 99%+ removal efficiency at 2 microns. Elements are also available in polyester and galvanized wire mesh.
The Solberg F Series of Intake Filters feature durable weatherproof housings and ample surface area which provides long lasting filtration.
- The weatherhood is removable for access to the air filter element
- Standard finish is gray baked enamel
- 99%+ removal efficiency standard Polyester: 5 microns, Paper: 2 microns
- Heavy gauge base with low pressure drop outlet pipe and center bracket design
- Low entry velocity air gap between base and cover
- Temp (continuous): min -15° F ( -26° C) max 220° F (104° C)
- Filter change out differential: 15-20″ H2O over initial delta P
- Corrosive resistant carbon steel construction with powder coat finish
If noise attenuation is also needed, check out the FS Series of filter silencers
F-18P-125 Solberg 1.25″ Inlet Filter
$49.88
Shipping Weight: | 3.3 lbs |
---|---|
Shipping Dimensions: | 6.25 × 6.25 × 6.75 in |
Max Flow: | 70 CFM |
Assembly Type: | Filter |
Connection Size: | 1.25" MPT |
Media Type: | Paper |
Manufacturer: | Solberg Manufacturing |