The Sutorbilt® California Legend “L” series was produced from 1990 until approximately 1996 when it was replaced by the Legend P series with enhanced performance capability. Maximum allowable speeds were increased as well maximum allowable differential pressure and vacuum in some cases.
If you have a Sutorbilt Legend “L” series, the data presented in this table are applicable.
Frame | Conn | Max RPM | cfr | Slip | Max ΔT | Shaft Dia | Max ΔP | Max Vac |
---|---|---|---|---|---|---|---|---|
2ML | 1″ NPT | 4164 | 0.017 | 500 | 180 | 0.625 | 10 | 12 |
2LL | 2″ NPT | 4164 | 0.035 | 450 | 160 | 0.625 | 6 | 10 |
3HL | 1-1/4″ NPT | 3275 | 0.045 | 280 | 200 | 0.75 | 13 | 14 |
3ML | 2″ NPT | 3275 | 0.060 | 260 | 180 | 0.75 | 10 | 14 |
3LL | 2-1/2″ NPT | 3275 | 0.104 | 230 | 160 | 0.75 | 6 | 10 |
4HL | 1-1/2″ NPT | 3050 | 0.069 | 255 | 200 | 0.875 | 13 | 14 |
4ML | 2-1/2″ NPT | 3050 | 0.117 | 225 | 180 | 0.875 | 10 | 14 |
4LL | 3″ NPT | 3050 | 0.170 | 215 | 160 | 0.875 | 7 | 12 |
5HL | 2-1/2″ NPT | 2440 | 0.140 | 150 | 200 | 1.125 | 13 | 15 |
5ML | 4″ NPT | 2440 | 0.210 | 140 | 180 | 1.125 | 10 | 15 |
5LL | 4″ NPT | 2440 | 0.350 | 125 | 160 | 1.125 | 7 | 12 |
6HL | 3″ NPT | 2100 | 0.227 | 130 | 240 | 1.375 | 15 | 16 |
6ML | 5″ NPT | 2100 | 0.383 | 115 | 225 | 1.375 | 11 | 16 |
6LL | 6″ FLG | 2100 | 0.718 | 100 | 160 | 1.375 | 6 | 12 |
7HL | 4″ NPT | 1800 | 0.367 | 100 | 240 | 1.562 | 15 | 16 |
7ML | 6″ FLG | 1800 | 0.733 | 85 | 225 | 1.562 | 10 | 16 |
7LL | 8″ FLG | 1800 | 1.200 | 75 | 160 | 1.562 | 6 | 12 |
8HL | 4″NPT | 1575 | 0.566 | 90 | 240 | 1.75 | 15 | 16 |
8ML | 8″ FLG | 1575 | 1.04 | 75 | 225 | 1.75 | 10 | 16 |
8LL | 10″ FLG | 1575 | 1.74 | 67 | 160 | 1.75 | 6 | 12 |